RMW1000HA

RADIO MIC UHF PLL IR SYNC HEADSET 606 – 630 Mhz .

  • Available requency ranges: 606 – 630 MHz.
  • 50 meter / 160 feet range
  • 50 Hz – 15 KHz frequency response
  • -105 dB signal / noise ratio
  • 99 selectable channels
  • Diversity antenna
  • Up to 5 systems usable in the same location
  • Automatic channel scan
  • IR sync
  • ABS carrying and storage case

Consumer alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

Technical Specifications

RECEIVER
Receiver type: PLL synthesized
Frequency range: UHF
Frequency stability: 0,01%
Modulation Method: FM ( 3 )
Audio Frequency response: 50 Hz – 15 Khz
Thd: < 0,8%
Dynamic range: ≥ 100 dB
Sensitivity: -105 dB for 12dB SINAD
Output level: -13 dBv Balanced -2dBv, unbalanced ¼ jack
Power supply: Dc 12-18 Volt 150 mA
Dimension: 197( L) x 134(D) x 42(H) mm
Weight: 0.820 Kg
TRANSMITTER
Transmitter type: PLL synthesized
Frequency range: UHF
Frequency stability: 0,01%
Modulation Method: FM ( 3 )
Audio Frequency response: 50 Hz – 15 Khz
Thd: < 1%
Dynamic range: ≥ 100 dB
S/N ratio: ≥ 90 dB
RF output power: 10 mW
Current drain: 160 mA
Tone pilot frequency: 30 ~ 33 Khz
Microphone Condenser: Headset
Battery: 2 x 1.5 Volt “AA” type
Autonomy: 8 hours
Dimension: 64 ( L) x 19(D) x 108 (H) mm
Weight: 0.10 Kg

logo-proel-sound
RMW1000HA
RADIO MIC UHF PLL IR SYNC HEADSET 606 – 630 Mhz .
  • Available requency ranges: 606 – 630 MHz.
  • 50 meter / 160 feet range
  • 50 Hz – 15 KHz frequency response
  • -105 dB signal / noise ratio
  • 99 selectable channels
  • Diversity antenna
  • Up to 5 systems usable in the same location
  • Automatic channel scan
  • IR sync
  • ABS carrying and storage case

Consumer alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

RECEIVER
Receiver type: PLL synthesized
Frequency range: UHF
Frequency stability: 0,01%
Modulation Method: FM ( 3 )
Audio Frequency response: 50 Hz – 15 Khz
Thd: < 0,8%
Dynamic range: ≥ 100 dB
Sensitivity: -105 dB for 12dB SINAD
Output level: -13 dBv Balanced -2dBv, unbalanced ¼ jack
Power supply: Dc 12-18 Volt 150 mA
Dimension: 197( L) x 134(D) x 42(H) mm
Weight: 0.820 Kg
TRANSMITTER
Transmitter type: PLL synthesized
Frequency range: UHF
Frequency stability: 0,01%
Modulation Method: FM ( 3 )
Audio Frequency response: 50 Hz – 15 Khz
Thd: < 1%
Dynamic range: ≥ 100 dB
S/N ratio: ≥ 90 dB
RF output power: 10 mW
Current drain: 160 mA
Tone pilot frequency: 30 ~ 33 Khz
Microphone Condenser: Headset
Battery: 2 x 1.5 Volt “AA” type
Autonomy: 8 hours
Dimension: 64 ( L) x 19(D) x 108 (H) mm
Weight: 0.10 Kg